TOILET SEAT RISER W/ARMS
3.5" TOILET SEAT RISER W/ARMS, USE WITH EXISTING SEAT, STANDARD
- ADDS 3.5” OF HEIGHT Reduces bending and twisting, the raised seat makes it easier to sit or stand
- USE WITH EXISTING SEAT Safely fits any toilet with an interior lip for added stability and security
- TOOL-FREE INSTALLATION Easily installs under an existing toilet seat without tools
- COMFORT GRIP HANDLES Removable, corrosion-resistant handles are padded with a soft, closed-cell foam to provide a comfortable, secure grip
- DURABLE COMPOSITE CONSTRUCTION Durable, split-resistant composite riser safely supports up to 300 pounds
- EASY TO CLEAN Seat riser and handles are easy to clean with traditional disinfectant solutions
SPECIFICATIONS
Uses:
- Adds height to the toilet seat for stability and to reduce bending and twisting
Dimensions For Standard Seat:
- Length of seat from front to back: 17.25”
- Length of seat inside from front to back: 11.25"
- Width of seat from left to right: 13.89”
- Width of seat inside from left to right: 10.25”
- Height of seat: 3.5”
- Thickness of seat: 2”
- Handle width: 22”
- Handle length: 12.5”
- Distance between handles: 19"
Dimensions For Elongated Seat:
- Length of seat from front to back: 19.25”
- Length of seat inside from front to back: 13.25"
- Width of seat from left to right: 13.75”
- Width of seat inside from left to right: 10”
- Height of seat: 3.5”
- Thickness of seat: 2”
- Handle width: 21.25”
- Handle length: 14.5”
- Distance between handles: 19"
Materials:
- Composite
- Aluminum
- EVA foam
How To Attach Removable Handles:
- Find the right side handle marked with an “R” and a blue arrow. The left side handle is marked with an “L” and a red arrow
- Slide each arm into the seat by pressing the brass pin on the arm and sliding each arm into position. Make sure the pin is facing out
- You will hear a click and see the pin emerge through the positioning hole when the arm is in place
How To Install:
- Remove the existing toilet seat and lid from the toilet
- Place the toilet seat riser on the rim of the toilet and center as necessary. Make sure the lip underneath the riser is inside the bowl
- Attach the original toilet seat and lid on top of the toilet seat riser using the included hardware. Thread the screws through the holes in the back of the seat. The plastic washers are placed on the top of the screw and the metal washers are placed on the bottom. Tighten each screw with the butterfly nuts
Care Instructions:
- Wipe down seat riser and handles with a traditional disinfectant solution
What’s Included:
- Raised toilet seat with removable handles
- 2pc - 6.125” long screws (Flathead)
- 2pc round plastic washers (1.18” outer diameter)
- 2pc round metal washers (0.95” outer diameter)
- 2pc butterfly nuts
- Lifetime Guarantee
Specifications
| SHAPE | STANDARD or ELONGATED |